How do I choose a leveling caster for a specific application?

Work from one deciding variable per application: for welding tables it is load per leg and floor flatness, for tool cabinets it is mounting height, for scaffolding it is height and locking, for machine tools it is vibration damping. Identify that variable first and the shortlist usually narrows to two or three models.

Can one leveling caster model serve several applications?

Yes. Mounting type and load per caster decide the model, not the equipment name, so several applications typically converge on the same few models in the range.

What load range do DancyCastor leveling casters cover?

The range covers 50 kg to 1,500 kg per caster, from light workbenches through to heavy machine tools and welding tables.

Do you make casters for equipment not covered in these guides?

Yes. Send the mounting footprint, the load per point and the rolling surface, and we will select a model from the full range or quote a custom bracket version.

What is the minimum order for a customised version?

Samples start at 4 pcs per model. Custom OEM versions such as special colours, logos, stem lengths or plate patterns are typically 5,000 pcs per model.

Leveling Caster Applications by Industry & Equipment

Not sure which one applies?

Start with the leveling caster buyer’s guide for load calculation, mounting types and wheel materials, or just describe the equipment and the floor to us. We will come back with a model, a price and a lead time — and tell you honestly if a leveling caster is not the right answer. The factory profile, certifications and commercial terms behind every model are set out on the leveling caster manufacturer in China page.

The One Variable That Decides the Caster

Before model numbers, every one of the twelve situations above comes down to a single deciding variable. Name that variable and the shortlist narrows on its own — which is why the table below is the fastest way into this page.

Application	The deciding variable	What we ask you first
Welding Tables	Load per leg, and how flat the floor is	How heavy is the table, and how many legs does it stand on?
Fixture & Modular Tables	Whether the top plane has to repeat after every move	Does the table need to return to the same height each time it is rolled back?
Workbenches	Drawer mass sitting high above the wheels	How much of the load is in the drawers rather than on the top?
Tool Cabinets & Job Boxes	Mounting height under a low cabinet base	How much clearance is there under the cabinet?
Scaffolding & Mobile Towers	Height, and whether it must be locked in position	How high does it go, and does anyone stand on it while it is levelled?
Engine Hoists & Stands	Wheel diameter needed to clear joints and grit	What surface will it roll across — shop floor, yard, or both?
Uneven Floors & Rough Surfaces	Is it a levelling problem or a wheel-diameter problem	What is the height difference between the highest and lowest point?
Lathes & Machine Tools	Vibration damping, plus coolant and swarf exposure	Must the machine stay true while it is running?
Compressors, Generators & Pumps	Vibration walk, plus oil or weather exposure	Does it run continuously indoors, or outside?
Storage Racks & Shelving	Column load carried by every upright	What is the loaded weight on each upright?
Food Processing & Clean Rooms	Wash-down construction with no plating to flake	Is the area hosed down or chemically cleaned?
Medical & Lab Equipment	Quiet rolling and floor protection	What floor covering will it be moved over?

Honest limits: a leveling caster levels a machine — it does not replace an outrigger on a scaffold, flatten a rough yard floor, or carry a medical device’s own certification. Where an application sits outside what a leveling caster can do, the guides say so, and so will we.

Application Selection — Quick Answers

Which application is the most demanding?: Welding and fixture tables. On these the pad, not the wheel, carries the load, and any flex in the assembly shows up in the workpiece. That is why those two guides spend most of their length on the bracket rather than the caster.
Can one caster model cover several applications?: Usually yes. Mounting type and load per caster decide the shortlist — the name of the equipment does not. Several of the twelve guides above finish on the same few models.
Do you supply casters for equipment we have not listed?: Yes. The twelve guides cover the enquiries we receive most often. Send the mounting footprint, the load per point and the surface, and we will match a model from the full range.
What if the floor is the problem rather than the equipment?: Then it may be a wheel-diameter decision rather than a levelling decision. The uneven floors guide sets out where a leveling caster stops helping and a bigger wheel or a different product is the honest answer.
Are these guides based on real orders?: They are written from the enquiries and orders we handle, including the practical checks and the failure modes customers report. We do not publish customer names, projects or order values.

Still unsure which guide applies? Describe the equipment, the floor and the load to our team — we will come back with a model, a price and a lead time, and tell you honestly if a leveling caster is not the right answer.

Leveling Casters by Application

Not sure which one applies?

The One Variable That Decides the Caster

Application Selection — Quick Answers

Need Custom Leveling Solutions?